Ubiquiti Loco M5 Point-to-Point Wireless Bridging Kit
These units are pre-configured for a basic transparent point-to-point bridge.
Backup configuration files (attached) are for master and slave devices.
IP Addresses are in a rarely used IP range to avoid conflict with your network.
To access the Web Interface you will need to configure your PC with an IP within this subnet (e.g. 172.17.2.50) with netmask 255.255.255.0.
You should change this password for security purposes, in the “System” tab of the Web Interface.
We recommend changing the SSID and WPA2 passphrase. By default these are:
WPA2 PSK: bridgelink
These can be changed in the “Wireless” tab of the web interface.
If you require assistance installing or configuring this equipment please call us on 0800 ETHERNET (09 415 4182 from a mobile).